Iteaduino PLUS with A10 Core Manual
iteadstudio.com
21
st
August, 2013
14
Tech Support: [email protected]
pinMode(48, OUTPUT);
while(1)
{
digitalWrite(pin, HIGH);
delay(1000);
digitalWrite(pin, LOW);
delay(1000);
}
}
c.
Compile and run
After the program is composed and saved, exit, open the terminal with shortcut keys ctrl + alt + T,
and enter the following in the pop-up command line port:
cd /home/linaro/Documents
Press Enter, and then enter
ls
Then you should be able to see file test.c. Next, perform
iteadcompile test test.c
You can see the program named test in folder /home/linaro/Documents by executing command ls.
Then execute the program:
sudo ./test