Iteaduino PLUS with A10 Core Manual
iteadstudio.com
21
st
August, 2013
8
Tech Support: [email protected]
supply and monitor, then we can enter the wonderful world of ITEAD OS.
3.
Installing ITEAD OS under linux system (let's take Ubuntu as an example)
a)
Use shortcut keys Ctrl+Alt+T to open the terminal
b)
Insert Micro-SD card into the system and confirm device name of Micro-SD via entering
command fdisk
sudo fdisk -l
As shown in the following figure, in this case, Ubuntu system loads Micro-SD card as /dev/sdc
c)
And Micro-SD card file system can be unloaded via command umount
sudo umount /dev/sdc1
sudo umount /dev/sdc2
d)
In the folder where img file locates, write mirror image file to SD card via command dd
dd ms=1M if=itead-plus-beat-0814-final.img of=/dev/sdc
e)
After the card is successfully written, the system will prompt information such as time spent on
and speed of writing the card.
f)
Withdraw Micro-SD card and then insert it into socket on Iteaduino PLUS, connect to power
supply and monitor, then we can enter the wonderful world of ITEAD OS.
