ITC SCT512, Руководство пользователя

Страница: 4 / 14

ENGLISH
4
SPECIFICATIONS
Your new ITC 011106 comprises:
=
Cordless Drill
=
2 batteries
=
1 hour charger
=
1 magnetic hex driver extension
=
6 -¼" hex screwdriver bits
=
6 drill bits
=
2 double-ended screwdriver bits (stored in clips on
the drill handle)
=
1 blow-mould plastic case
=
Voltage:18 volts DC
=
No load speed: variable in two ranges:
0~350 rpm / 0~950 rpm
=
Reversible with electric brake
=
Chuck: 3/8" (10mm) Keyless
=
Charger: 1 Hour Quick cUL & UL Approved
=
Batteries: 1,300 mAh NiCd rechargeable
=
Torque: 20 Setting Clutch (plus drill setting)
WARNING! For your own safety do
not attempt to use your electrical tool
until the battery is fully charged and
you have read all the instructions
REMEMBER: This cordless tool is
always in an operating condition and
does not need to be plugged in to a
wall socket power supply before it can
cause injury.
CAUTION!
=
Do not expose either the electrical
tool or charger to rain or water.
=
Do not overcharge the battery as
this could damage the cells.
=
Do not force the tool. If the tool
is labouring, it is possible that the
battery power is low. If so, stop
working and recharge the battery
pack.
=
To prolong the life of the tool, do
not continually work more than 15
minutes at a time.
A NiCd battery
B Variable speed trigger
C 3/8" (10 mm) chuck jaws
D Chuck-opening ring
E Shaft control ring
F Clutch selection ring
G Torque selection scale
H Indicator arrow
I
Gear selector
J Bubble vial level
K Cooling vents
L Forward/Reverse/Lock button
M Handle
N Double-ended driver bit
O Battery lock/release tab
!
FUNCTIONAL dESCRIPTION