19
Operation
5.1.3 Analogue mode
This mode allows dosing proportional to an analogue 0/4 - 20 mA input.
PROPORT.
%
Set Point 000,05
03,6
Stop Pump
Stop Vol (1)
ON
PROPORT.
%
Set Point 000,05
03,6
Stop Pump
Stop Vol (1)
ON
150
l / h
00,0
l / h
03,6
l / h
30
m3/h
l
%
6 2
8 9
Volume to be dosed
volume dosed
By pressing ENT the ON/OFF indicator will change to ON and
the pump will start if the Remote Activation input is activated.
The pump will stop when it reaches the maximum volume set.
ENT
ENT
%
l / h
0 0 0
0 0 0
MODE
x2
MODE: Manual
Proportional
Batch
Analog
1
l / h
00mA
o
%
0 0 0
0 0 0
5.1.3.1 Analogue mode configuration
ANALOG INPUT
INPUT
16,0 mA
= 100
%
00,0 mA
=
%
067
ANALOG INPUT
INPUT
16,0 mA
= 100
%
00,0 mA
%
067
25.0
25.0
Select mA input for the first point
Change by pressing
and confirm by pressing
ENT
Select ON to perform proportional dosing with a volume limit.
The pump will stop when it reaches the ENT maximum volume
to be dosed.
Change by pressing
and confirm by pressing
ENT
Set the desired maximum volume.
Change by pressing
and validate by pressing
ENT
Select the flow in % for the first point in mA
Change by pressing
and confirm by pressing
ENT
Create Flow
[email protected]
www.createflow.cz
Distribuce Create Flow
tel: +420 722 712 652
