
WatchPAT
™
ONE System
16
Operation Manual
Once these steps are completed the device is ready for operation.
3.2
Sleep Test
You can start the home sleep test once all setup activities are completed successfully
and you are in bed and ready to go to sleep. The Application will confirm that all the
sleep test preconditions have been properly met and a START button will be
displayed.
Press the START button and go to sleep. The data is recorded throughout the night
and stored in a remote Web Server.
NOTE
If you need to get up during the night, there is no need to carry
around the Mobile phone. Yet, do not remove the WatchPAT device
or sensors.
3.3
Test End
In the morning an END RECORDING button will be displayed on the Application
screen. Press the END RECORDING button and the recording will stop. At this stage
you should take off the device from your arm, finger and chest (if exists). The last of
the recording data still needs to be transmitted from the device so keep the device in
proximity of the phone and before you close the Application wait for the
Application’s confirmation of the completion of the test.
Follow the local, state, national governing ordinances and recycling instructions
regarding disposal or recycling of the device and device components, including
batteries.
NOTE
The battery is most likely still functional after the full night sleep test, so
you may consider using it in another appliance, before disposing of it.