28/06/2013 7CH4Q107_E_4
17
HANDHELD PROGRAMMER WIGWAGS CALIBRATION:
Step 1:
SPEED REFERENCE
F10 =
s-en
+
Choose “single-ended” option, and
confirm it by “MODE” button.
Step 2:
SPEED REFERENCE
F10=
w-w1 o w-w2
+
Choose “wigwag 1” or “2” or “3”
option, and confirm it by “MODE”
button.
Step 3:
POTI COURSE
no
+
Choose “poti course” option, and
confirm it by “MODE” button.
Step 4:
POTI COURSE
no
+
Choose “tar to set poti course”
option, and confirm it by “UP” button.
Step 5:
POTI CALIBR.
Vzero = #.# V
+
Set the potentiometer or throttle at
STOP / NEUTRAL position, and
confirm it by “MODE” button.
Step 6:
POTI CALIBR.
-Vmax = #.# V
+
Set the potentiometer or throttle at
MAX BACKWARD position, and
confirm it by “MODE” button.
Step 7:
POTI CALIBR.
+Vmax = #.# V
+
Set the potentiometer or throttle at
MAX
FORWARD
position,
and
confirm it by “MODE” button.
The wigwag reference range is calibrated.
