5
Important safety notice
General safety instructions
Please read the following safety precautions carefully before putting this device to use to avoid any
personal injuries, damage to the instrument, or to the target system.
Use this instrument only for its intended purpose as specified by this manual to prevent potential
hazards.
Use included power cord and power supply
The enclosed power supply has been approved for use by iSYSTEM. Please contact iSYSTEM if you
need to consider an alternative power.
Use grounding wire
Prior to applying power to either the BlueBox or the target, connect the device and the target system
together with the included grounding wire. This is to avoid potential damage caused by any voltage
difference between the device and the target system.
Use proper overvoltage protection
Please ensure proper protection to avoid exposing the BlueBox device or the operator to overvoltage
surges (e.g. caused by thunderstorm, mains power).
Do not operate without cover
Do not operate the device with cover removed.
Avoid circuit and wire exposure
Do not touch exposed components or wires when the device is powered.
Do not operate with suspected damage
If you suspect damage may have occurred, the BlueBox device must be inspected by qualified service
personnel before further operation.
Do not operate the device outside its rated supply voltage or environmental range
Consult with iSYSTEM before using equipment outside of the parameters provided in this manual.
This symbol indicates further safety notices within this manual.