14
Lane link speed
Default the lowest Aurora link speed is set which ensures the most likely working trace operation.
Note that this setting directly impacts on Aurora trace interface bandwidth. The higher the speed,
more trace information per time unit can be broadcasted over the interface. Hence, once the
Analyzer trace operation (e.g. trace or profiler or coverage) is confirmed with the default setting,
higher Aurora link speeds should be tested and the highest operational speed then selected for
usage. This way the Active Probe will be configured for maximum possible Analyzer session time.
Different speeds (1.25Gbps, 2.5Gbps) are available.
Other, more general of Infine
on’s AURIX™
microcontroller family related settings are described