PRODUCT OVERVIEW
26
GAUGES AND INDICATORS
The operator’s console provides you with the
means to start and stop the unit and a series of
gauges and indicators that inform you about the
current status of the engine. This is a required
engine component. Since the operator’s console is
application specific, it must be carefully selected by
an application engineer. It is not part of the basic
engine package as shipped from the Isuzu factory.
NOTICE
The illustrations and descriptions of optional
equipment in this manual, such as the operator’s
console, are for a typical engine installation. Refer
to the documentation supplied by the optional
equipment manufacturer for specific operation and
maintenance instructions.
Gauges
The following gauges are located on a typical
operator’s console. Some operator’s consoles may
not have the gauges described here or may have
different gauges.
Figure 7
Figure 8
Tachometer - The tachometer display
(Figure 7, (1)) or (Figure 8, (1)) shows the engine
speed in revolutions per minute (RPM).
Engine coolant temperature - The engine coolant
temperature display (Figure 7, (2)) or
(Figure 8, (2)) shows the temperature of the engine
coolant.
Engine oil pressure - The engine oil pressure
display (Figure 7, (3)) or (Figure 8, (3)) shows the
pressure of the engine oil.
Hour meter - The hour meter display
(Figure 7, (4)) or (Figure 8, (4)) shows the total
number of hours the engine has run. This is useful
for planning the Periodic Maintenance Procedures
on page 66.
K0000023A
4
1
2
3
10
20
20
40
100
180
220
250
60
80
0
30
40
0
x100
RPM
VDO
VDO
PSI
F
C
0
1
2
3
4
5
bar
80
100
120
0
AUX
MC-704HP-G4
K0000024A
1
2
4
3
TNV_OperationManual_T4(under 19kW).book Page 26 Wednesday, June 17, 2015 11:23 AM
