Isuzu 3CH1-NGZG01 Скачать руководство пользователя страница 72

Страница: 72 / 114

PERIODIC MAINTENANCE

PERIODIC MAINTENANCE
PROCEDURES

Perform the following maintenance after the initial
50 hours of operation.

• Replace engine oil and engine oil filter

• Check and adjust cooling fan V-belt

■

Replace engine oil and engine oil filter

WARNING

Burn Hazard!

• If you must drain the engine oil

while it is still hot, stay clear of
the hot engine oil to avoid being
burned.

• Always wear eye protection.

• Failure to comply could result in death or

serious injury.

WARNING

Sudden Movement Hazard!

• Engaging the transmission or PTO at an

elevated engine speed could result in
unexpected movement of the equipment.

• Failure to comply could result in death or

serious injury.

NOTICE

• Only use the engine oil specified. Other engine

oils may affect warranty coverage, cause internal
engine components to seize and/or shorten
engine life.

• Prevent dirt and debris from contaminating the

engine oil. Carefully clean the oil cap/dipstick and
the surrounding area before you remove the cap.

• Never mix different types of engine oil. This may

adversely affect the lubricating properties of the
engine oil.

• Never overfill. Overfilling may result in white

exhaust smoke, engine overspeed or internal
damage.

NOTICE

• Always be environmentally

responsible.

• Follow the guidelines of the EPA or other

governmental agencies for the proper disposal of
hazardous materials such as engine oil, diesel
fuel and engine coolant. Consult the local
authorities or reclamation facility.

• Never dispose of hazardous materials

irresponsibly by dumping them into a sewer, on
the ground, or into ground water or waterways.

• Failure to follow these procedures may seriously

harm the environment.

After Initial 50 Hours of Operation

TNV_OperationManual_T4(under 19kW).book Page 66 Wednesday, June 17, 2015 11:23 AM

Содержание 3CH1-NGZG01



















































































































Результаты поиска

Содержание 3CH1-NGZG01

Отзывы:

Похожие инструкции для 3CH1-NGZG01

Бренды по названию

Популярные бренды

Isuzu 3CH1-NGZG01, Руководство по введению

Результаты поиска

Содержание 3CH1-NGZG01

Отзывы:

Похожие инструкции для 3CH1-NGZG01

Бренды по названию

Популярные бренды