L.83.0072 - Release 8.0.1 CH 2013
ista International GmbH - Grugaplatz 2 - 45131 Essen
http//www.ista.com
Device Manual
2.4-Y optosonic u 3 radio net
13/15
Nur f
ü
r d
e
n int
e
rn
en Gebr
auc
h
—
For int
e
rn
al
use
only
— Unique
me
nt
pour
ut
ilisat
ion int
e
rne
5.2
Replace ultego III
1. Disconnect the opto head from ultego III.
2. Replace the ultego III as per its installation instructions.
3. Remove the adhesive pad from the opto head.
4. Remove the protective foil from one side of the new adhesive pad.
5. Glue the new adhesive pad on to the opto head.
6. Pull off the protective foil from the rear of the opto head.
7. Glue opto head onto the ultego III. Here, the rack on the opto head and the tip of the arrow marking
on the ultego III (exception: ultego III eco) must be in one line.
8. Reparameterise the optosonic u with the PDA.
NOTICE
►
If the optosonic u is to be used further, the ultego III may be replaced only by a device of the same type.
1
2
3
4
5
6
7
8
1.
2.
01 234 567
2013
11a
M-Bus
M
Y
01 234 567
2013
11a
M-Bus
M
Y
01 234
Y
