L.83.0072 - Release 8.0.1 CH 2013
ista International GmbH - Grugaplatz 2 - 45131 Essen
http//www.ista.com
Device Manual
2.4-Y optosonic u 3 radio net
11/15
Nur f
ü
r d
e
n int
e
rn
en Gebr
auc
h
—
For int
e
rn
al
use
only
— Unique
me
nt
pour
ut
ilisat
ion int
e
rne
1. Open clamping cover.
2. Press a pushbutton on ultego III to activate it.
3. Jumper in as delivered condition.
4. Pull off the jumper.
After maximum 20 seconds, the optosonic u 3 radio net
switches to the installation mode for 4 minutes.
5. Parameterise the optosonic u 3 radio net with the PDA.
6. The device will go into the measuring mode after parame-
terisation or 4 minutes.
▪
Continue with step 10 after the parameterisation.
▪
Continue with step 7 after 4 minutes without parameteri-
sation.
7. Position jumper on the right-hand pins and pull off again af-
ter approx. 5 seconds.
The device sends installation beacons for 4 minutes.
8. Parameterise the optosonic u 3 radio net with the PDA.
9. The device will go into the measuring mode after parame-
terisation or 4 minutes.
▪
Continue with step 10 after the parameterisation.
▪
Continue with step 7 after 4 minutes without parameteri-
sation (total 10 attempts).
10. Close clamping cover
11. Seal screw.
12. Clean the device.
4
Commissioning
1
2
3
4
5
6
7
8
9
10
11
12
