Taking off the BCD
1)
Find a flat surface to set the cylinder(s) down so pressure is taken off the harness. It is a good idea to
have your dive buddy keeping the cylinder(s) steady until the BCD is off.
2)
Undo the waist strap and crotch strap by releasing the weight buckle
For the deluxe harness, please also undo the sternum strap
3)
Move arms out of the shoulder straps or if using the deluxe harness, it can be easier by undo either or
both of the shoulder strap buckles.
BCD care and storing
-
Do not put or drag the BCD across rough and / or sharp surfaces.
-
Do not place any sharp and / or heavy object on any part of the BCD.
-
Do not expose the BCD to the sun while not actually diving.
-
Immediately after a dive, rinse the BCD with fresh water as soon as it is possible. The air cell will require
extra cleaning on the inside and it can be easier done if it is taken off the BCD assembly. Press the power
inflator’s deflation button to let fresh water in through the mouthpiece. At about a quarter full, gently shake
then turn the air cell upside down so it can be rinsed thoroughly. Drain some water through the inflator
mouthpiece then the rest through the over-pressure valve(s). Repeat 2 to 3 times.
-
Hang the BCD up to dry in a shaded place and inflate the air cell so it can dry inside and out –
DO NOT
use
a hook on the fabric part of the air cell when hanging or damage can result!!!
Do not put your BCD away until it is completely dry!
-
Store the BCD with the air cell slightly inflated in a cool, shaded place.
-
Have an IST authorised dealer to inspect your air cell at least once a year to ensure proper and safe
functioning of all parts.
35
VI. BUOYANCY DATA and MAXIMUM TANK SIZE
BUOYANCY DATA and MAXIMUM TANK SIZE
Model
Buoyancy
Max. tank size*
JT-30D, JT30H
JT-31D, JT-31H
120N / 27lbf
Single 15L
JT-40D, JT-40H
JT-41D, JT-41H
170N / 38lbf
Single 15L
JT-50D, JT-50H
JT-51D, JT-51H
200N / 45lbf
Twin 15L
JT-65D, JT-65H
290N / 65lbf
Twin 15L
* Max. tank size refers to back mounted cylinders.
VII. WARRANTY
Use of non-original factory parts or any modification may
irreparably damage this BCD, which will render the
warranty void and can lead to a loss of buoyancy control
or air holding capability while diving. This could result in
injury or death. ONLY replace worn or damaged items
with genuine, factory supplied parts from an IST
authorised dealer.
Your BCD should be inspected by an IST authorized
dealer at least once a year, and more often if you dive
frequently. This is a required action to keep your
warranty in effect
The warranty of this floatation device is valid to the original owner only (with proof of purchase) AND
it covers any defects in materials and / or workmanship for the period of
2 years
from the date of
purchase. Proper maintenance as prescribed in this manual is required to uphold the warranty
during valid coverage period. Any wear and tear under normal usage, as well as any commercial /
rental usage, are not covered by this warranty. The following action will also void the warranty:
incorrect use or misuse (intentional or unintentional) of the BCD; the use of non – IST original parts;
any modification; servicing task performed by an unqualified and / or non - IST authorised dealer.
If a problem has developed with your BCD, please contact your nearest IST authorised dealer or IST
distributor for return authorisation. Please properly package the BCD and send with your proof of
purchase and postage prepaid. We reserve the right to service any non-authorised returns.
36
Содержание Dolphin Tech JT-30D
Страница 22: ...41 www istsports com...
