background image

 

Inflator with recreational style shoulder dump valve is also available separately &comes in 
either 14” or 16” long assembly. – please contact your local IST dealer for more information.

 

 
All power inflator’s recommended working pressure is 7.6BAR (110psi) ~ 11BAR (160psi) and the ideal 
pressure is between 9.5BAR (138psi) ~ 10BAR (145psi). 

 
 
 

 

 

SINGLE TANK ADAPTOR 

CAM TANK BANDS 

Item no.: STA-1 & BP-2/IST 

 

Your Dolphin Tech technical single-tank BCD 

comes with a stainless steel single tank 

adaptor, complete with fitting hardware 

(contains 2 sets of square based screws, flat 

washers, split washers and winged nuts) and 2 

cam tank bands. 

 
 
 

 

 

TWIN TANK BANDS 

Item no.: (BP3-H) 

 

Your twin-tank technical BCD 

comes with 2 twin tank bands and 

attaching hardware (2 connecting 

bolts, 2 normal & 2 aircraft nut (nut 

with nylon insert), 6 flat washers 

and 2 split washers). They should 

be compatible with cylinders either 

with 7.25” / 184mm or 8” / 203mm 

nominal diameter. 

 
 
 
 
 

WEIGHT POCKETS 

Item no. JT-WP7 

 
Dolphin Tech weight pockets are made from 1680 denier ballistic nylon for durability. There are 3 webbing 
loops on the reverse side and arranged in a way that when the harness webbing is threaded through, the 
weight pocket will be stable and not flap around. It is designed to hold up to 7kg (15lb) of weight each. 

 

 

 

 

Front  

 

 

 

 

 

      Back 

 
Each weight contains an

 inner weight pouch

. It conveniently keeps all solid or soft weights together as a 

single unit. The

 bottom opening

 is held close by a quick release buckle and Velcro. Only use this opening in 

the event of an emergency when weights need to be jettisoned.   
 
 
 

BACK PLATE POUCH (with fitting hardware) 

Item no. HB-4 

 

 

 

The back plate pouch is to be attached to the back plate and is used to store utility lifting device(s) such 
as a safety sausage. The additional gear can be snugly sandwiched between your back and the back 
plate so it is out of the way with no additional underwater drag created. A quick snap can secure the 
content to the crotch strap’s tail D-ring to prevent accidental loss of equipment (right).

 

 

Содержание Dolphin Tech JT-30D























Отзывы: