background image

 

CROTCH STRAP 

Item no.: HB-3

 

 

     

 

 
 
 

Made from softer nylon webbing, IST 

technical BCD crotch strap is 2” wide 

but is comfortable to use. The 

abdomen end of the strap has a 

pre-sewn loop for the ease of 

installation. Comes complete with 

D-rings and webbing keepers. 

 
 
 

AIR CELLS 

JT-30 - 30lb air cell, JT-40 – 40lb air cell, JT-50 – 50lb air cell & JT-65 – 65lb exp. air cell 

 
 
IST’s air cells’ 

outer shells are 

all made from tough 1680D ballistic nylon and inner bladders from TPU coated 

nylon. They are made for you to safely take on the toughest dive missions.   
 
 

 

 

 

 

 

 
 

 

 
 
For JT-30 single tank (left) and JT-50 twin tank (right) air cells, each has a single inner bladder, and comes 
with a single 16” inflator with standard technical elbow connection and an over-pressure exhaust valve to the 
front lower left side (when wearing). They have 1 pair of grommets at industry standard 11” apart. 
 
 
 
 

 

 

 
JT-65 is like JT-30 and JT-50 but packed with redundancy features * and more. It has a back up 19” inflator 
hose, which is attached to a second (back up) bladder. Each bladder also has 2 over-pressure exhaust valves 
for convenience in buoyancy control. The position of the valves and inflators can also be interchanged for a 
personalised set-up. There are 3 sets of grommets and each set has 2 holes, are 11” apart. You can fine-tune 
your bladder location in relation to the harness and tanks. Lastly, due to its increased size, a parameter 
bungee cord wraps around the air cell to restore hydro-dynamics when less / no air is inside the inner bladder 
while diving. 
 

* Note: The primary bladder should be used at all time during a dive unless, in the unlike event of 
it becoming faulty, ONLY then the redundant (back up) bladder can be used. As to how primary / 
redundant bladder is arranged, please consult your technical dive manual and / or instructor. 

 

         

 

 

The rapid exhaust valve automatically 

releases gas when the pressure inside 

the bladder is 0.17kg/cm² (2.4psi) > the 

ambience to protect the bladder from 

bursting. 

 

 

All air cells come with 16” long power 

inflator and standard technical elbow 

connection (left) except for JT-65, which 

back up power inflator is 19” long. There is 

a 13” long option (as extra) for those who 

prefer a shorter set-up. 

 

Содержание Dolphin Tech JT-30D























Отзывы: