22
3.10.2 In Case Of Auto Power Off Inhibit
This setting determines some conditions that will stop and reset the timer of automatic shutdown. If n-SPK is not at these
conditions, the timer starts. And when the timer reaches the value of Auto Power Off Timer described above, n-SPK shuts down
automatically. The conditions that may disable the shutdown function are listed as below.
3.10.2.1 Pairing Mode
The n-SPK is in Pairing Mode.
3.10.2.2 Music Streaming
The n-SPK is playing music with A2DP link.
3.10.2.3 Line-in Plugged
The line-in jack of n-SPK connects a music input.
3.10.2.4 Link Back
The n-SPK is linking back to a remote device.
3.10.2.5 Charging
The n-SPK is charging.
3.10.2.6 HF Link
The n-SPK has an HF link.
3.10.2.7 A2DP Link
The n-SPK has an A2DP link.
3.11 Charging Setting
The n-SPK supports charging function. In general, there are several stages in charging cycle and it has different ways to charge
in each stage. When charging, n-SPK detects the voltage of battery to decide which stage is it in. The charging flexibility n-SPK
supported lists as below.
3.11.1 Charging Detect Enable
Enable or disable the charging function.
3.11.2 Advance Charger Enable
This setting determines whether charging continues for an additional 30 minutes when charging current diminishes to the
minimum current as condition of charging complete.
3.11.3 Re-Charging as Charge complete
Enable or disable the recharging function. When n-SPK stops charging due to charging complete for a while, the voltage of
battery may fall slowly. If the voltage less than 4.1V and this function is enabled, n-SPK charges battery again to keep it full.
