STORE to save it, but you can wait until after you have edited the preset
mapping to do this save. The STORE LED lights if any changes have been
made to remind you to save it.
Preset Mapping Function
Turning the FUNCTION knob one more detent clockwise accesses this function.
The LED above the RECALL 1 switch will light, and the preset that is mapped to
that switch will be displayed. Turning the VALUE knob will allow you to select
which preset you would like mapped to RECALL 1. Note the presets will be
immediately recalled so you can audition them to aid in your selection. Turn the
PARAM knob clockwise one detent will then light the LED above the RECALL 2
switch, and the preset that is mapped to that switch will be displayed. You can
then turn the VALUE knob to select that preset to map to RECALL 2. You can
then repeat this process for the RECALL 3 and RECALL 4 switches. When
complete, press 2
nd
, then STORE to save the changes to the current song.
Turning the FUNCTION knob fully counterclockwise will then display the song
title, and pressing one of the RECALL switches will recall the mapped preset and
display its title.
Song Copy
To copy a Song to a different location, first ‘fully’ recall the song by pressing one
of the RECALL 1 to 4 switches. Then scroll to the desired new location by using
the PRESET down or up switches or the VALUE knob (if FUNCTION is set fully
counterclockwise). Note that the Song titles will flash, meaning the Song is not
fully recalled. Then press 2
nd
, STORE to store the last recalled Song into the
new location. The original contents of this location will be overwritten, so be
careful. To exit SONG MODE, press 2
nd
, then SONG. The blue SONG LED and
red 2
nd
LED will turn off, and you will be back in preset mode, where you can edit
presets if you wish. NOTE YOU CANNOT EDIT VALUES WITHIN PRESETS
WHEN YOU ARE IN THE SONG MODE.