iSP Technologies THETA PRO DSP Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 25

iSP Technologies THETA PRO DSP Скачать руководство пользователя страница 19

the threshold in all presets equally.  It is useful for situations where
you are playing with a different guitar or in a different environment,
where  you  need  a  temporary  change  in  the  decimator  threshold,
without  having  to  change  decimator  settings  within  individual
presets.

b. G: STAGE OUT (STEREO or MONO): When set to MONO, the left

and right STAGE OUTs will be summed and divided by 2. This is
useful when you only have a single speaker cabinet on stage.

c. G:STAGE SPKR SIM (OFF or ON): Typically this would be set to

OFF  for  using  a  traditional  1x12,  2x12,  or  4x12  guitar  cabinet  on
stage.  But  if  you  want  to  use  a  full  range  cabinet  such  as  a  vocal
wedge, or even in-ear monitors, yet still control their volume via the
STAGE OUT LEVEL on the front of the unit, setting this to ON will
route  the  INTELLIGENT  SPEAKER

™ processed output to the

STAGE OUT jacks.

d. G: DIRECT OUT (STEREO or MONO): When set to MONO, the

left and right DIRECT OUTs will be summed and divided by 2.  This
is  useful  when  you  only  want  a  mono  feed  to  the  front  of  house.
Note  that  this  will  also  affect  the  phones  output,  since  they  share
the same pair of DAC channels.

e. G: DIRECT TRIM (-12 to 0 dB): This attenuates the DIRECT OUTs

to prevent input clipping on some mixers.

f. G: DIRECT EQ (OFF or ON): This turns on a stereo 3-band EQ

section on the DIRECT OUTs. Remember, this EQ curve will then
be present on all presets, and is useful for making basic corrections
to speakers and rooms.

g. G: DIR BASS (-15 to +15 dB): Consult the POST EQ function for a

detailed explanation of these 7 EQ parameters.

h.  G: DIR BASS (40 to 240 Hz):
i.  G: DIR MID (-15 to +15 dB):
j.  G: DIR MID (88 to 6000 Hz):
k.  G: DIR MID (0.1 to 2.5 OCT):
l.  G: DIR TREBLE (-15 to +15 dB):
m.  G: DIR TREBLE (2000 to 12.0k Hz):
n.  G:  STAGE  EQ  (OFF  or  ON):    This  turns  on  a  stereo  3-band  EQ

section on the STAGE OUTs. Remember, this EQ curve will then
be present on all presets, and is useful for making basic corrections
to speakers and rooms.

o. G: STAGE BASS (-15 to +15 dB): Consult the POST EQ function

for a detailed explanation of these 7 EQ parameters.

p.  G: STAGE BASS (40 to 240 Hz):
q.  G: STAGE MID (-15 to +15 dB):
r.  G: STAGE MID (88 to 6000 Hz):
s.  G: STAGE MID (0.1 to 2.5 OCT):
t.  G: STAGE TREB (-15 to +15 dB):
u.  G: STAGE TREB (2000 to 12.0k Hz):

«
...
17
18
19
20
21
...
»

Содержание THETA PRO DSP


























Отзывы:

Нет отзывов