MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 6. 2017
15
Make sure the box is alwa
ys securely mounted. See section „Installation of controls“.
2.6. CHECKING FOR SQUARENESS
Always make sure the screen is installed perfectly level and square.
There is only one way to check and correct this.
1. First check whether the box is mounted perfectly level.
2. Check whether the guide rails run parallel to each other and
perpendicular to the box. Measure the diagonals to the
nearest millimetre. Start directly beneath the box. Deviations
of more than 2 mm may cause the fabric and/or bottom slat to
get stuck or the fabric to hang loosely.
3. Next measure the diagonals to the nearest millimetre.
If the box and guide rails are not mounted properly, the bottom slat will
always roll into the box at an angle, resulting in diagonal creases in the
fabric.
Once the screen has been accurately positioned and mounted, any small gaps between the guide rails and wall (box and
wall) can be sealed with silicon caulk.
fig. 29
fig. 28
