13
TROUBLESHOOTING
14. THERMAL CUT-OUT
The machine is equipped with the following electrical protection systems, thermal cut-out (1), located
off the handlebars, to protect the motor. In the event of malfunctioning, check a thermal cut-out has not
intervened. If the motor overheats, its thermal cut-out intervenes to block the electricity supply. Wait a
few minutes until it has cooled down, then press the specific trip unit button to reactivate the power
supply and motor operation.
15. THE MACHINE VIBRATES OR OSCILLATES
In case the machine vibrates or oscillates during its operation, or has been sitting in rest position for too
long, with the pad still inserted, replace it as soon as possible.
16. MOTOR BRUSH WEAR INDICATOR
The machine is provided with a red warning light which indicates the base motor brushes are worn out.
When it is on contact a
ISOPLAM
technician as soon as possible to replace the brushes.
1
ISOPLAM S.R.L.
ISOP
Via E. Mattei, 4 – Z. I. Maser (TV) – Ita
ly
Tel. (+39) 0423 925023 - www.isoplam.it
Company certified
UNI EN ISO 9001:2015
