App Features
Control
The Control page allows you to set the
iSmartAlarm system mode. Your Account
ZL[[PUNZ-HTPS`ZL[[PUNZUV[PÄJH[PVUZHUKV[OLY
systems you’re a member of are also accessed
here. To access these sections, tap the
CubeOne icon in the upper-left corner.
Arm
– When the system is set to the
Arm
, all
Contact Sensors and Motion Sensors are
active. The siren will activate if any sensors are
triggered.
Disarm
– This mode will de-activate all sensors
from triggering the alarm. This mode will also turn
off the siren after the alarm is triggered or set to
Panic
.
Home
– When the system is set to the
Home
, only the contact
sensors are active. Motion sensors will not trigger the alarm;
however, motion sensors will display a log of all detected movement.
This mode allows you to stay secure at home without triggering the
alarm.
Panic
– Double tap twice to turn on the siren and send a push
UV[PÄJH[PVU[VHSSTLTILYZVM[OLP:THY[(SHYTZ`Z[LT
Custom Modes
– Custom modes allow you to create your own
J\Z[VTPaLKZL[VMZLUZVYZ[OH[JHU[YPNNLY[OLHSHYT;VTHUHNL`V\Y
custom modes, tap
Edit
in the upper right corner and select
Panic
.
10
