Ismart LTC-A2001NV2, Руководство пользователя

Страница: 19 / 56

13
Blocking zones: There are 8 blocking
zones shown in green rectangle, they can
be configured independently. The moving
objects inside the blocking zones of the
full-view camera will not be detected and
tracked while the tracking camera still tracks
the lecturer.
Tracking Setting
Tilt Motion:
when it’s enabled, the camera
will automatically adjust tilt angle during
tracking. When it’s disabled, the camera will
track as per the tilt angle of preset 1.
If the lecturer does not walk into the student
area, it’s suggested to disable auto zoom
and tilt motion.
Permanent Tracking:
when it’s enabled,
tracking will be activated all the time even
when the lecturer walks into the student
area. To avoid an extreme low tilt angle, it’s
suggested to disable permanent tracking,
and the camera will not track at an extreme
low tilt angle.
Auto zoom:
when it’s enabled, during
tracking, the camera will auto zoom in or out.
When it’s disabled, the zoom during tracking
will be according to preset 1.
Keep tracking outside tracking zone:
When it’s enabled, the camera will still track
if the object is outside the tracking zone.
Tracking Parameters
Track Sens: Set sensitivity of tracking
based on speed of movement. High
sensitivity will track at small movement.
Pan Speed: Set pan speed for tracking;
Tilt Speed: Set tilt speed for tracking;
Zoom Limit: Higher value enables more
zoom times.
Lost Timeout: Set the interval before
Object Lost Action will be performed, (go to
preset 1 or 0). Default is 5 seconds.
In/Out podium : This is used to define the
detecting sensitivity when lecturer moves
out of the lower part of the Priority Zone, if
you want the camera to detect sensitively
when the lecturer moves out of the lower