Ismart LTC-A2001NV2, Руководство пользователя

Страница: 21 / 56

15
send code during tracking;
“PTZ motion
/switching code at res mode
” means that the
tracking camera always follows the target,
but in the process of following, it will send
code once the camera moves or stops,
which is convenient for the recorder to
switch to wide angle image when the
camera is moving, and when the camera is
stationary, it switches to close-up image;
“The speed of PTZ movement fast / slow
switching code” means that the camera
always follow the object, but in the process
of following, once the camera speed
becomes faster or slower, it will send code,
which is convenient for the recorder to
switch to the wide angle image when the
camera moves fast, and switch to close-up
images when the camera moves slowly.
Send type: two options of returning codes:
“send only once” and “always send”.
Director rules: camera has built-in
switching rules, the blackboard writing
sensor does not send out switching code,
then when internal switching rule is selected,
it will do internal communication, finally
lecturer tracking camera sends out codes
according to internally switched sequence.
In the internal switching regulation, the
blackboard has the highest priority level,
followed by the lecturer tracking camera
images.
When the internal switching rules is not
applied, the blackboard writing sensor, and
the lecturer tracking camera send returning
codes respectively according to the
customized switching code, every video can
be switched according to its own priorities;
first select the "target appear", "target miss",
"In podium" and "Out podium" options, and
then set the following switching code, each
switching code includes maximum 8 bytes.
Each byte is represented by a hexadecimal
number and separated by a space.