iSMA-B-AAC20 DALI manual
Page 13 / 19
5
DALI light control components
5.1
DALI Command
Defining the function, further parameters can be set to select the destination address
for which the function is intended (group or individual address) and the type of Sedona
DALI command to be performed.
Sedona DALI Protocol allows addressing of individual 'control gear' (ballasts, relays,
dimming circuits, etc.) without needing to refer to a parent device.
Sedona DALI Command is used for triggering Sedona DALI commands. Individual in
slots are provided for various Sedona DALI commands. A transition from ‘false’ to true
will cause the associated Sedona DALI command to be sent to the control gear.
DALI Device component ha
s
the following actions:
•
Send – This action will send DALI command to DALI devices
Figure 9 – Sedona DALI Command
Sedona DALI command has the
following
slots:
•
Status – Component current status,
•
Description – User description up to 32 characters,
•
Command – Parameter to a control gear,
•
Address – Short DALI device address or DALI group address,
•
Address Type – You can manage single device, group or all DALI devices,
•
Value – Intensity values for scenes,
•
Trigger – rising edge will send DALI command to DALI devices,
