iSMA-B-AAC20 DALI manual
Page 14 / 19
5.2
DALI On Off
This component has built-in DALI command which will be send to DALI device/devices
on slots On and Off rising edge
The component has the following actions:
•
Send On – This action will send to DALI device/devices command “On”
•
Send Off – This action will send to DALI device/devices command “Off”
Figure 10 – iSMA DALI On Off
The component has the following slots:
•
Status – Component current status,
•
Description – User description up to 32 characters,
•
Address – Short DALI device address or DALI group address,
•
Address Type – You can manage single device, group or all DALI devices,
•
On – rising edge will send switch On command to device/devices
•
Off – rising edge will send switch Off command to device/devices
5.3
DALI On Off Dimming 1 Switch
This component has the built-in DALI command which allows to switch On and Off or
to change DALI device/devices lighting level. This component was designed to work
with single switch (one button connect to one digital input). The switch is working in
two modes - short and long press. The short press (when Switch slot is in true mode
for the time below parameter defined in Long Press slot), recall toggle function so each
short press sends On / Off command to DALI device/devices. The long press is to
increase or decrease lighting level. Each press toggle between increase or decrease
function. Current lighting level is stored in the device in scene number defined in slot
Scene No For Last Level (in default scene no 15). The short press On command will
recall lighting lever stored in this scene. The component knows how to perform the next
