DMP116it | 1
st
Issue rev. a | 03/2022
pag.
MVC503R-MB Configuration Tool
–
Product Manual
14
Figure
15. Actuator status box shows the information about the actuator status
•
Status:
it shows the current status of the actuator (initial positioning, calibrating,
up end stroke, down end stroke, up positioning, down positioning) and the led
status on the electronic board.
•
First Power-Up:
it shows if the actuator has been powered on for the first time.
•
Up Position:
it shows how many times the actuator stem was in the fully
retracted position.
•
Down Position:
it shows how many times the actuator stem was in the fully
extended position.
•
Stroke Under 2mm:
it shows a calculated actuator stroke anomaly during
calibration phase (stroke below 2mm).
•
Stroke Over 12mm:
it shows a calculated actuator stroke anomaly during
calibration phase (stroke above 12mm).
