DMP116it | 1
st
Issue rev. a | 03/2022
pag.
MVC503R-MB Configuration Tool
–
Product Manual
10
Figure
11. Device Manager, select
Ports (COM and LPT) option
•
Modbus address of the device (
Modbus Address
). Modbus address is selectable
via the first 7 dipswitches of the actuator following the encoding into the
technical manual (example to select address 1, the dip switch n°1 has to be
positioned on ON).
The modification of the modbus address on the device is only active by
switching the actuator off an
d on again or pressing the button “RESET” on
the manager interface.
•
Modbus Status:
shows the status of the modbus communication and the
current operation in progress.
•
Toggle Button (CONNECTED/DISCONNECTED):
allows to connect or disconnect
the serial converter. If the COM port has not been detected this button is not
enable.
