6
© Island Pellet Stoves 2016
Lundy 5kW Operation Manual - 19.02.16
PELLE TS AND FEEDING
The pellets used shall be EN Plus A1 grade 6mm wood pellet fuel.
NO OTHER FUELS SHOULD BE USED
A bag with a maximum weight of 10 kg is recommended for convenience.
To fill the store, open the top hatch and load the pellets.
Please Note:
If the hopper was completely empty before refuelling, the stove will not light on the
first attempt. A second attempt needs to be made to allow the fuel to filter through to the chamber, or
alternatively you can manually feed pellets into the hooper in the settings menu.
IGNI TION PROC EDURE
Check Stove power switch is plugged in and on. Fire up the stove via one of the two methods below.
The Stove will go through a “Fire Up” phase, including internal and external checks before self
igniting.
This can take 10-15 minutes,
before entering a “Burning” phase.
Once in the “Burning” phase the Stove continuously checks conditions such as air and flue
temperatures. If needed it will restart by itself. It will continue burning and self regulate heat output to
match the desired room temperature. During the first few hours of operation you may notice a paint
smell, this is normal.
Please Note:
When lighting the stove for the very first time the hopper that delivers the fuel to the
burning chamber will be empty, therefore you will need to do a manual feed via the settings menu. If
you do not do this, the first ignition attempt will fail and a second attempt will be needed.
TURNING ON THE HEATING DEVIC E
Option 1 - Via The Display.
• If in idle mode, touch the screen to exit it.
• Tap on to enter the Temperature menu.
• Tap on to enter the Main menu.
• Hold
to turn on the heating device.
Option 2 - Via The Remote.
• Press
on the remote to turn on the heating device.
• You can then use the and buttons to adjust the power and temperature.
(See page 3 for
details of the remote.)
Содержание LUNDY5
Страница 12: ......
