Island stoves LUNDY5, Основное руководство по эксплуатации

Страница: 5 / 14

5
© Island Pellet Stoves 2016 Lundy 5kW Operation Manual - 19.02.16
A DJUSTING TIME, DAY, MONTH AND YEAR
- If in idle mode, touch the screen to exit it.
- Tap on to enter the Temperature menu.
- Tap on to enter the Main menu.
- Tap on to enter the Settings menu.
- Tap on
‘Time’ to enter the Time menu.
- Set up Hours, Minutes and Day of the week by taping on and/or icons. After completing
the settings, save them by tapping on .
Please Note: If the time is not set properly the weekly timers will not perform when desired.
SE TTING WEEKLY TIMER S
The Lundy allows you to set up to 6 different time intervals (TI). A maximum of 3 intervals can be
used per day.
• If in idle mode, touch the screen to exit it.
• Tap on to enter the Temperature menu.
• Tap on to enter the Main menu
• Tap on to enter the Timers menu.
• Tap on
‘Add new timer’ to add a new timer.
• Select the day/days you want the time interval to appear, by tapping on the initial of the day:
M T W T F S S . The selected days will be highlighted.
• Set the timer start (hours and minutes) for the first time interval by tapping on ‘Time start’ and then
and/or icons. Save the settings by tapping
‘OK’ .
• Set the timer finish (hours and minutes) for the first time interval by tapping on ‘Time finish’ and then
and/or icons. Save the settings by tapping
‘OK’ .
• Set the target temperature for the first time interval by tapping on and then and/or
icons. Save the settings by tapping ‘OK’ . You can cancel the changes by tapping ‘DELETE’ .
• Once you complete all your weekly timer settings you will then need to enable the weekly timers
operation to make them perform. If you do not enable them, the heating will not turn ON/OFF
automatically but your timers will still be saved. To enable/disable the timer operation, tap on the
‘ON/OFF’ button in the timers menu.
• Exit from the timers menu by tapping
.
Please Note: If the actual temperature is already higher than the target temperature when the time
interval starts, the heating device will not be turned ON automatically until the actual temperature
falls under the time intervals target temperature (provided the time interval is still active).