1
The
ISIMET
Fuel Gas Sensor features a raw gas sensor, a clear lamp, a red/green LED and a Reset Switch mounted
onto a Stainless Steel Wall Panel. The wall box with mounting brackets and skirt is provided.
The unit is intended for use as a sensor to detect raw fuel gas. The remote monitoring pcb features two time delay
“ON” circuits that are field settable from 0 to 5 minutes. The unit can be used to prevent incidental or unintentional
alarm notification.
Typical detection range for the sensor is 1 – 25% LEL (Lower Explosion Limit) or 50 – 10,000 ppm.
ISIMET
Gas Sensor
Independent Unit
Installation, Operations, Start-up and
Maintenance Instructions
Table of Contents:
Page
Warranty…………………………………………………..
2
Enclosure Dimensions and Model Number Description…..
3
Mounting Instructions (Flush)….………………………….
4
Mounting Instructions (Surface Mount)..………………….
4
Mounting the Wall Panel..…………………………………
4
Circuit Output Configurations………………………….….
5
Adjusting the Output Timing……….……………….……..
6
Output Wiring Configurations……………………………..
6
Installing the Electrical Conduit…………………………...
6
Wiring the Unit…………………………………………….
6
Connecting the Wall Panel…………………………………
6
Connection of the Wall Panel Plugs………………………..
7
Operation of Unit…………………………………………..
7
August 2015
Meets all Standards for Canadian Industrial Control Panels
DOC# 18407
