4
Wall Panel Terminal Mounting Brackets (2)
Mounting
Screws
(4)
Mounting Instructions: Flush Wall Mount
Two mounting flanges with screws are provided with the
unit. Attach flanges as shown above. Flanges can be
affixed to any two corners of the unit. Then, fasten unit
between two (2) wall studs. The face of the box should be
even with the face of finished wall surface. After mounting
unit, protect interior of box from construction debris.
CAUTION: Provided mounting hardware must be used.
Mounting Instructions: Surface Mount
In order to surface mount the unit, the provided mounting
hardware must be used. Care should be taken to not damage
the unit when mounting and to verify that the mounting means
securely fastens the unit to the wall surface. A stainless skirt is
provided in order to conceal the wall box from view. An
arrow on the inside of the skirt indicates mounting direction.
Mounting Flange
Wall
Housing
Mounting the Wall Panel:
•
Verify that Unit is wired with junction box cover in
place.
•
With the Door open, position the Wall Panel over the
Wall Box as shown.
•
Holding panel in front of box, affix panel to box using
four (4) 8-32 stainless screws
•
Close the panel and lock.
CAUTION!
Do not install the panel until all wall finishes
are complete.
Panel Plugs In Here
