ISHIDA INS-100 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 45

background image

IMPORTANT

NOTICE

This manual explains the procedures to perform installation, setup, service, or maintenance of the
machine. Those who handle the machine must be aware of the hazards involved. These dangers may
not be obvious, so it is imperative to follow the instructions detailed in this manual when performing
installation, setup, service, or maintenance of the machine. Therefore, we recommend that you
thoroughly read and understand this manual before performing installation, setup, service, or
maintenance of the machine, and keep this manual in a safe place where you can refer to it whenever
necessary.

Safety countermeasures should be carefully considered and implemented before performing any
installation, setup, service, or maintenance procedure not specifically described in this manual or
indicated on the machine itself.

ERRORS

AND

OMISSIONS

The information in this manual has been carefully checked and is believed to be accurate. However,
please understand that the descriptions in this manual may not agree with the actual machine due to
machine improvements. ISHIDA assumes no responsibility for clerical, typographical or proofreading
errors, or omissions.

LIMITATIONS

OF

LIABILITY

ISHIDA is not liable for any damage, loss or injury that results from incorrect handling, insufficient
caution, unauthorized modifications to the machine, or failure to follow the instructions contained in
this manual.
ISHIDA assumes no responsibility for special, indirect, or consequential damages, loss of profits or
commercial loss in any way connected with the machine, whether such claim is based on contract,
warranty, negligence, or strict liability.
ISHIDA shall assume responsibility for problems with the machine based on an individual
maintenance contract. However, ISHIDA shall not be responsible for secondary problems.
ISHIDA assumes no responsibility for the user's programming of this machine, or any consequence
thereof.
In no event shall ISHIDA be responsible for warranty, repair, or other claims regarding the machine
unless ISHIDA’s analysis confirms that the machines were properly handled, stored, installed, and
maintained and not subject to contamination, abuse, misuse, or inappropriate modification or repair.

INS-100 Service Manual No. 085-6692-09

3

«
1
2
3
4
5
...
»

Содержание INS-100














































Отзывы:

Нет отзывов

Похожие инструкции для INS-100

Бренд: Tanita Страницы: 11

Бренд: Tanita Страницы: 15

Бренд: Marta Страницы: 18

Simple Precision Weight Scale

Бренд: KAM Страницы: 12

Бренд: Fagor Страницы: 38

Бренд: Excell Страницы: 35

Бренд: OHAUS Страницы: 6

Бренд: Fagor Страницы: 50

Бренд: Orbegozo Страницы: 15

Бренд: HAEGER Страницы: 20

Бренд: U.S. Solid Страницы: 31

Nimbus NBL Serie

Бренд: Adam Equipment Страницы: 264

Бренд: Gravity Measurement Страницы: 11

Бренд: Gravity Measurement Страницы: 15

Бренд: Eldom Страницы: 29

Бренд: Bartscher Страницы: 130

Бренд: Mesko Страницы: 44

Бренд: DAVI & CIA Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды