manualshive.com logo in svg

ISHIDA CCW-R-2 B Series, Инструкция по эксплуатации, Страница: 292 / 492

Поделиться
Скачать
ISHIDA CCW-R-2 B Series Скачать руководство пользователя страница 292

8  OPTIONAL FUNCTIONS

CCW-R-2**B INSTRUCTION MANUAL

8-4

When the parent head count is set to “2”, the following items must be set to each parent head respectively.
When the parent head count is changed to “2” and the parent head setting is not yet completed, the parent 
head setting index blinks to prompt you to complete the setting.

4

[Parent Zero Adjust] key

Sets the interval to perform zero adjustment for the parent head.
0: Zero adjustment operation is not performed for the parent head.
Other than 0: Interval for the zero adjustment is set. The number of times that 
the parent head discharges products is counted. For example, when “100” is 
set as the interval, zero adjustment is performed in every 100 discharges from 
the parent head.

•

When the automatic zero adjustment interval is set 
to “0” in the weigher specification setting screen, 
the zero adjustment interval for the parent head 
cannot be specified. 

5

[Parent Dump Mode] radio button

When the number of parent heads is set to “2”, selects discharging mode from 
[Alternate] or [Simul.].
[Alternate]: Products are discharged first from P1 parent head and then from 
P2 parent head.
[Simul.]: Each parent head discharges products simultaneously.

6

[Action Over Upper Limit] radio 
button

Selects the action when the parent head weight exceeds the upper weight limit 
that is described later in this section.
[PrntDump]: Discharges products from the parent head only.
[P & C Dump]: Discharges products from both parent head and child heads.

•

If the parent head weight reaches the full scale, the 
alarm buzzer sounds and the discharge operation is 
not performed.

7

[Action Under Lower Limit] radio 
button

Selects the action when the parent head weight falls below the lower weight 
limit that is described later in this section.
[PrntDump]: Discharges products from the parent head only.
[Add’nl Feed]: Does not discharge products and supplies additional products.

•

If the parent head weight is judged as an under scale, 
the alarm buzzer sounds without supplying 
additional products.

8

[Parent Head Setting] index

Displays the [Parent Head Setting] screen.

Table 8-1 Items and Functions of [Prnt & Child Setting] Screen (Continued)

No.

Name

Function

Содержание CCW-R-2 B Series













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов