manualshive.com logo in svg

ISHIDA CCW-R-2 B Series, Инструкция по эксплуатации

ИSHIDA CCW-R-2 B Series - профессиональный индикатор, предназначенный для точного взвешивания продуктов. Установите его легко с помощью инструкции пользователя. Скачайте бесплатное руководство по эксплуатации с manualshive.com. Используйте ключевые слова: "Инструкция по эксплуатации", "руководство", "скачать", "бесплатно".

Поделиться
Скачать
background image

6 FUNCTIONS OF THE OPERATION SCREENS

CCW-R-2**B INSTRUCTION MANUAL

6-86

[Mean Count]
* Displayed during count set 
weighing only.

The mean count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the mean count for the channel during channel total display.
Displays the mean count for the section during section total display.

[S.D. Count]
* Displayed during count set 
weighing only.

The standard deviation count of proper dumps that occur between the start time and 
stop time.
Unit: pcs
Displays the standard deviation count for the channel during channel total display.
Displays the standard deviation count for the section during section total display.

[MAX Count]
* Displayed during count set 
weighing only.

The maximum count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the maximum count for the channel during channel total display.
Displays the maximum count for the section during section total display.

[MIN Count]
* Displayed during count set 
weighing only.

The minimum count of proper dumps that occur between the start time and stop time.
Unit: pcs
Displays the minimum count for the channel during channel total display.
Displays the minimum count for the section during section total display.

[Count Range]
* Displayed during count set 
weighing only.

The difference between the maximum count and minimum count of proper dumps that 
occur between the start time and stop time.
Unit: pcs
Displays the count range for the channel during channel total display.
Displays the count range for the section during section total display.

[Mean Piece Weight]
* Displayed during count set 
weighing only.

The mean piece weight of proper dumps that occur between the start time and stop 
time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The mean piece weight is displayed during single weighing or section total display.
This is not displayed while section switching is available during channel total display.

[S.D. Piece Weight]
* Displayed during count set 
weighing only.

The standard deviation piece weight of proper dumps that occur between the start time 
and stop time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The standard deviation piece weight is displayed during single weighing or section 
total display.
This is not displayed while section switching is available during channel total display.

[MAX Piece Weight]
* Displayed during count set 
weighing only.

The maximum piece weight of proper dumps that occur between the start time and 
stop time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The maximum piece weight is displayed during single weighing or section total 
display.
This is not displayed while section switching is available during channel total display.

[MIN Piece Weight]
* Displayed during count set 
weighing only.

The minimum piece weight of proper dumps that occur between the start time and stop 
time.
Unit: g (“oz” is used in case of ounce supported)
This is not displayed in case of mix weighing during channel total display.
The minimum piece weight is displayed during single weighing or section total 
display.
This is not displayed while section switching is available during channel total display.

Table 6-39  Total Data Items (Continued)

Item Name

Description

Содержание CCW-R-2 B Series













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CCW-R-2 B Series

York Fitness G500 Owner'S Manual preview
G500
Бренд: York Fitness Страницы: 34
Eaton SafeLite Mounting And Operating Instructions preview
SafeLite
Бренд: Eaton Страницы: 16
Eaton EMS-2 Instruction Leaflet preview
EMS-2
Бренд: Eaton Страницы: 6
Ecco 21 Series Installation Instructions Manual preview
21 Series
Бренд: Ecco Страницы: 17
Eaton COOPER POWER SERIES Operating Instructions Manual preview
COOPER POWER SERIES
Бренд: Eaton Страницы: 8
Panta Safe Light Solar Quick Start Manual preview
Solar
Бренд: Panta Safe Light Страницы: 2
Calrec OMEGA Installation Manual preview
OMEGA
Бренд: Calrec Страницы: 70
Laserworld EL-60 G Manual preview
EL-60 G
Бренд: Laserworld Страницы: 8
Laserworld EL 200 LED User Manual preview
EL 200 LED
Бренд: Laserworld Страницы: 6
LaserLiner ActivePen Manual preview
ActivePen
Бренд: LaserLiner Страницы: 56
LaserLiner AC-tiveMaster Operating Instructions Manual preview
AC-tiveMaster
Бренд: LaserLiner Страницы: 54
Olsen Logic Operation Manual preview
Logic
Бренд: Olsen Страницы: 58
Quark-Elec QK-A031 Setup Manual preview
QK-A031
Бренд: Quark-Elec Страницы: 2
Woods RB750-4 Operator'S Manual preview
RB750-4
Бренд: Woods Страницы: 54
Reflex Marine WAVE4 User Manual preview
WAVE4
Бренд: Reflex Marine Страницы: 36
Whitehall Thermo Therapy TT-202 Instructions For Operation And Care preview
Thermo Therapy TT-202
Бренд: Whitehall Страницы: 12
U.S. Products HydraMaster driMaster HiFlo Upholstery Tool Owner'S Manual preview
HydraMaster driMaster HiFlo Upholstery Tool
Бренд: U.S. Products Страницы: 28
Bowa TissueSeal Operating Manual preview
TissueSeal
Бренд: Bowa Страницы: 44

Бренды по названию

Популярные бренды

Загрузить еще бренды