ISHIDA CCW-R-2 B Series Скачать руководство пользователя страница 153 | Manualshive

Страница: 153 / 492

ISHIDA CCW-R-2 B Series Скачать руководство пользователя страница 153

CCW-R-2**B INSTRUCTION MANUAL

6 FUNCTIONS OF THE OPERATION SCREENS

6-41

Table 6-12 Items and Functions of [Combination] Tab Screen

No.

Name

Function

1

Combination weight display

The combined weight value is displayed on each channel.
The lamp indication varies depending on the results.
Green lamp: Proper weight
Yellow lamp: Overweight
Red lamp: Underweight

2

Head condition display

Displays the combination and weighing status.

: Head which was weighed and is stable.

: Head which was weighed, was selected for combination and discharged

products.
The color of the circle indicates the head stability, and there are three levels:
green (most stable), white (more stable) and yellow (stable).

: Empty head.

Blank: Unstable head.

: Head under the auto zero adjustment.

: Head with error of overload or jam.

: Head that is set to be deactivated.

3

Head display guide

Displays the scrolling messages for the descriptions of head symbols.

4

Preset selection display

Displays the selected preset.
If the square on the left of each item ([Change Preset Item] button) is pressed,
the displayed setting values can be temporarily changed.

(

6.11.7 Preset Change Operation)

5

[Display Channel Selection] tab
(Double weigher only)

Selects the channel to be displayed.
Displayed only when the weigher setting is C1 + C2.

6

[Select Display] pop-up key

Selects the display method from either the combination or expansion display.
Standard and expansion display icons are displayed by pressing this key.
Pressing either icon will switch the display to the selected method.

7

Section weight display
(Mix weigher only)

Displays the weight of each section.

«
...
151
152
153
154
155
...
»

Содержание CCW-R-2 B Series













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов