ISHIDA BC-4000TEC, Руководство пользователя

Страница: 81 / 128

Chapter 5 REGISTRATION MODE
5.10 DEFAULT PLU (P08)
The default PLU will appear whenever each transaction is completed.
1 [P08 Screen]
Make sure that “Default PLU” screen (P08)
appears on the display.
Otherwise, access this screen by referring to
Section 5.1: Registration Mode Entry/Exit.
2 [Key In PLU No.]
Press the [ENTER] key to access “Key In
PLU No.” screen (P08-00).
Key in a desired PLU number (8 digits) to set
as a default data and press the [ENTER] key.
Note: To disable the default PLU, key in “0” and
press the [ENTER] key.
d
d
PLU number
3 [Return to P01]
Press the [END] key to return to the P01
screen.
d
4 [Registration Mode Exit]
To exit Registration Mode, press the [MODE]
key.
The default PLU data that has been set in
step 2 above will appear on the display for a
few seconds.
Then, the initial screen appears.
d
d
BC-4000TEC User’s Manual No. JBAW97EBC-4000TEC 5-29