Isgus Perfect 2040, Руководство по эксплуатации

Страница: 58 / 198

4-26 Getting Started Chapter 4
not rounded original punching time is printed
Date IN
(printed)
IN
(rounded and
not printed)
OUT Total
25.11.02 AM 7:30 AM 8:00 PM 12:00 4.00
26.11.02 AM 8:01 AM 8:00 PM 12:00 8.00
27.11.02 AM 8:06 AM 8:00 PM 12:00 12.00
28.11.02 AM 8:07 AM 8:07 PM 12:00 15:53
rounded punching time is printed
Date IN
(not printed)
IN
(rounded and
printed)
OUT Total
25.11.02 AM 7:30 AM 8:00 PM 12:00 4.00
26.11.02 AM 8:01 AM 8:00 PM 12:00 8.00
27.11.02 AM 8:06 AM 8:00 PM 12:00 12.00
28.11.02 AM 8:07 AM 8:07 PM 12:00 15:53
Hint
In order to use this function for punch pairs, where the first IN
punch is rounded up to a time after the date change, the IN
punch revision schedule must also be defined beyond the date
change.
In the input routine possible time settings for the following day
are automatically marked with "
+ " in the 12 hours mode as well
as in the 24 hours mode (see the following example)
Example B: Revision time range on Monday: from = PM 11:30 to = AM + 00:22
Grace: 07 minutes
Rounding time: = revision time range end minus grace
= AM + 00:22 - 00.07 = AM + 00:15
Hint
If IN punches on Tuesday in the revision time range AM 00:00 to
AM 00:22 should be rounded to AM 00:15, it is necessary to
enter a corresponding time schedule for Tuesday.
Factory setting:
→
function deactivated