Isgus Perfect 2040, Руководство по эксплуатации

Страница: 41 / 198

Chapter 4 Getting Started 4-9
= Confirm the selection, setting
routine is completed.
The recorder changes to
operating display and shows
the current date and time.
Hint: If the "Master Clock"
option is enabled in the
function programming, the
time recorder will immediately
begin to transmit minute
impulses to connected slave
clocks. Refer to the
programming instructions "
"Setting time of slave clocks".
Setting the Time only
After setting the time, you can skip setting the date (if not required), by pressing the
"
E " key until the recorder returns to its normal operating mode display.
Conversely, if you only want to set the date and do not wish to change the time, you
can jump ahead to the date entry fields by pressing the "
S " key just once.