Turned tool changing station SK11 and SK20
6
/
27
April 2019
Work may only be carried out by authorised, qualified personnel
in consideration of the regulations of the electrical and
electronics industry, as well as accident prevention regulations.
The mains plug must be pulled out before opening the housing
and performing any work on the electrical installation.
Ensure that the turned tool changing station is sufficiently
cleaned on a regular basis.
Assembly and use of the equipment must take place in
accordance with the standards of the assembly / conformity
declaration. The regulations and thresholds observed by the
manufacturer do not safeguard against unintended use of the
equipment.
The equipment may not be exposed to high air humidity and
heavy vibrations.
Store this assembly manual in a safe location and require all
users to comply with its contents!
