Turned tool changing station SK11 and SK20
13
/
27
April 2019
4)
Figure 5: Connection to the safety circuit module
Connect the System OUT cable to
the appropriate jack on the turned
changer and route the cable to
the SKM-S1.2-E safety circuit
module in the switch cabinet.
White and black wires are already
connected at terminals X5:E1.3
and X5:E1.4 (standstill monitor of
motor modules without turned
changer). Disconnect these and
make the following connections.
white -> X5:E1.3, Stop1 IN
brown -> X5:E1.4, Stop2 IN
