Turned tool changing station SK11 and SK20
18
/
27
April 2019
You configure your tool
changer here. Enter the
start and/or end position of
the tool changer,
specify the interface, and
specify the individual tool
slots. Also use the detailed
Help in ProNC.
By clicking on
Parameters
you can change the speed
setting for the changing
station.
Specify the number of steps
required for a complete
rotation of the tool changer
as follows:
Gear reduction x motor step
resolution
For SK20:
5400 steps per rotation
For SK11:
800 steps per rotation
This provides the
advantage of moving the
tool changer over the
shortest path to reach the
tool.
Specify the speeds for the
tool change.
