Isel LES4 Скачать руководство пользователя страница 44

Страница: 44 / 69

LES 4, 5, 6 - 234xxx xxxx

38 / 62

Assembly instruction

●

Never disassemble the product.

●

Parts of the product can become very hot during the operation. Allow these parts to cool before touching.

●

Do not place any loose objects on the product.

3.3.2

Special safety instructions

You have to work on and with the machine exclusively with authorised, trained and instructed personnel. These

personnel must have received special instruction about potential dangers (especially about remaining risk).

product-specific safety instructions

NOTE!

Service life / wear

Non-observance of the safety instructions may result in damage to property!

The linear unit is not designed for continuous operation and must be serviced at regular

intervals. In order to be able to detect possible failures due to wear or material fatigue at

an early stage, regular visual and functional checks must be carried out.

Unauthorised conversion and/or modification of the linear unit is not permitted.

Do not subject the linear unit to any impermissible mechanical load under any

circumstances. Please observe the technical data in this Assembly instruction.

During operation, the linear unit must not be covered by supply lines, objects or

tarpaulins, packaging material or fabrics, etc., as this may cause mechanical damage or

heat accumulation and possibly lead to fire.

NOTE!

Falling / sagging during vertical mounting

Non-observance of the safety instructions may result in damage to property!

The ball screws in the linear units are generally not self-locking. For vertical installation,

the motor of the linear unit should therefore be equipped with a holding brake (in this

case, the spindle pitch of the ball screw and the weight of the loaded carriage plate must

be calculated), which secures the movable guide carriage of the linear axis against falling

down when the power is switched off.

If no holding brake (e.g. magnetic brake) is mounted on the motor, another (electro-

)mechanical brake must be used, e.g. on the counter bearing of the ball screw. Further
information on this can be found in the specialist journal "Gravity loaded axes" published

by the DGUV Wood and Metal Division.

NOTE!

electrical drives

Non-observance of the safety instructions may result in damage to property and/or personal

injury!

Before handling the product, read and observe the safety instructions in the manuals

regarding the motor, controller and control system.

Содержание LES4






































































Результаты поиска

Содержание LES4

Отзывы:

Похожие инструкции для LES4

Бренды по названию

Популярные бренды

Isel LES4, Инструкция по сборке

Результаты поиска

Содержание LES4

Отзывы:

Похожие инструкции для LES4

Бренды по названию

Популярные бренды