Isel iPC25 - F, Руководство по эксплуатации

Страница: 9 / 15

iPC25 operating instructions
Page - 6
3 Assembly and start-up
3.1 Installation dimensions
Make sure that there is always sufficient clearance for the air circulation on the
ventilation slots of the iPC. Failure to observe this measure will result in overheating
and possible defects in the control computer.
Avoid, as far as possible, extreme environmental conditions.
Protect the PC from dust, moisture and heat.
The ventilation slots of the PC must not be covered.
Scale drawing iPC25- F