Isel iPC25 - F, Руководство по эксплуатации

Страница: 10 / 15

iPC25 operating instructions
Page - 7
3.2 Switching on the control unit
The control unit is switched on via the contacts of the sub-D9-pin socket connection in the slot of
the iPC (see chapter 2.2).
When a 12V DC supply voltage is applied, the computer can also power up the
operating system independently. This is the default setting in the BIOS of the computer.
On delivery, the IPC25 computers are set up, so that the standalone start-up
is disabled.
The BIOS setting can be found under "
POWER

Power Failure Recovery
“
Important notice!
If the start-up of the control computer is set up in the BIOS when the supply voltage is applied, the
computer must be shut down properly before the machine is switched off. Otherwise there is the
risk of a loss of data as well as a damaged, operating system that can no longer be booted.