Isel DSH-S, Инструкция по сборке

Страница: 35 / 44

RDH-XS, RDH-S, RDH-M, DSH-S
35 / 44 April 2019
6.2 Electrical data
You can find the motor data, output stages mains values and connection values and controller data in
the documentation
https://www.isel.com/en/support-downloads/manuals.html
7 Maintenance and cleaning
7.1 Maintenance instructions
The RDH - RSH rotary units function extremely accurately and reliably. Maintenance costs are therefore
relatively low.
Maintenance of the rotary units is limited to cleaning them of coarse dirt particles and contaminants.
The Harmonic Drive Motors are ex works lubricated with special isel grease. No further basic lubrication
is necessary before the axis system is started up.
Maintenance interval Maintenance work
When necessary Clean the rotary unit
300
– 700 operating hours
Visual check of seals, attachments
2 years
Replace toothed belts (when available)
Replace shaft seal rings
7.2 Cleaning
Clean the surface of the rotary unit's cast housing and the output flange with a lint-free, dry/slightly damp
cloth. Do not use harsh cleaning agents or abrasive cleaners.