Iseki TXG237, Руководство по эксплуатации

Страница: 9 / 98

TXG237
8
■
BEFORE OPERATION
(1) Set up an operation plan with sufficient time al-
lowance. A tight plan may result in unexpected
accidents when work has to be rushed.
(2) Inspect and service the machine periodically in
accordance with the instructions given in the
operation manual to maintain the machine in best
condition.
Pay special attention to the controls, especially to
the brakes and HST pedal, and safety measures
for the machine when servicing it. If the machine
functions properly and performs normally, the
chance of an accident will be reduced greatly.
If safety devices are damaged or do not work,
please consult your Iseki dealer.
(3) Before removing a safety device, such as a safety
cover, be sure that the machine has stopped
completely. Never forget to replace the removed
part after servicing.
(4) Never fill fuel while the engine is running or is
still hot. Keep away from open fires an never
smoke around a fuel tank or while fuelling into the
machine. Never use open flames for illumination
when fuelling the machine at night.
■
STARTING ENGINE AND MOVING TRACTOR
(1) Before starting the engine indoors, make sure
that there is proper ventilation because exhaust
fumes contain poisonous carbon monoxide, which
cause lethal poisoning.
(2) Before starting the machine, confirm that the
transmission gear has been shifted to the ap-
propriate speed, that there is no one near the ma-
chine and that the implement is securely installed
on the machine.
Always operate the machine from the operator’s
seat. Never leave the seat except in an emer-
gency when operating the machine.
(3) Before starting to move, pay attention to safety
conditions around the machine to avoid injury to
bystanders or damage to property. Never move
abruptly.
FIG. 1-6
FIG. 1-7
FIG. 1-8
FIG. 1-9