Iseki TXG237, Руководство по эксплуатации

Страница: 29 / 98

TXG237
28
Coolant Temperature Gauge
FIG. 3-9: Gauge indicates engine coolant temperature
when main switch is selected to ON
･
- Shows too cool temperature for severe work.
Allow to warm (needle in mid position) before
applying heavy load.
･
- Indicates overheating (red area on gauge).
Reduce engine speed to idle, allow to run at
no load several minutes and investigate cause
(refer to “Troubleshooting”).
CAUTION: Do not service hot engine. Al-
low to completely cool before servicing or
removing radiator cap.
Tachometer
FIG. 3-10: Gauge indicates engine speed in crank
shaft revolutions per minute (rpm). Index is also
provided to show rear PTO speed of 540 at approxi-
mately 2484 engine rpm.
Normally, the PTO speed should be between 540 and
600. Operating the PTO at a speed above 600 is too
fast, and may result in a breakdown of the tractor or
implement.
Hourmeter in center of gauge indicates engine and
tractor use to assist in maintenance intervals. The
extreme right digit indicates 1/10 hour increments.
BRAKES
Brake Pedal
FIG. 3-11 & 3-12: Brake pedal, 1, controls left and
right wheel brakes at the same time.
FIG. 3-9
FIG. 3-10
FIG. 3-11
1