Iseki TM3215, Руководство по эксплуатации

Страница: 82 / 103

LUBRICATION & PERIODIC MAINTENANCE
81
Rear Wheel Spacing
To reverse the entire wheel and tyre assembly-Raise
both rear tyres of the tractor. Remove the bolts securing
both rear wheel assemblies to the rear axle hubs and
switch wheel assemblies to opposite sides of the tractor.
FIG. 6-45: Tyre Tread Widths
AGRICULTURAL TURF
A B C
TM3215 855 mm 1000 mm 950 mm
TM3245 855 mm 1000 mm 945 mm
TM3265 855 mm 1000 mm 945 mm
CAUTION: Rear wheels are heavy. Use care
when moving them. Make sure the tractor
is blocked securely. Tighten all wheel bolts
securely and recheck after short period of
operation.
NOTE: Agricultural lug-tyre tyres must always be in-
stalled so when viewed from the rear, the “V”
pattern of the tread points upward.
Steering Free-Play
FIG. 6-46: Steering system should be checked for ex-
cessive looseness as indicated by steering wheel free-
play. Maximum free-play is approximately 30 to 60 mm
(1-1/4” to 2-3/8”) when measured at the outside of steer-
ing wheel rim as shown at “X”. Excessive free-play can
be caused by:
・
Loose or worn ball joints
・
Worn or damaged steering column shaft
・
Worn or damaged power steering unit (if equipped)
CAUTION: Excessive steering free-play
must be corrected before use. Contact your
ISEKI dealer.
FIG. 6-45
X
FIG. 6-46