Iseki TM3215, Руководство по эксплуатации

Страница: 55 / 103

TM3215,3245,3265
54
CAUTION: Always lower implement to
ground, shut off engine and relieve system
pressure (by operating control levers with
engine off) before connecting or discon-
necting implement hoses.
CAUTION: Make sure all hydraulic hoses,
couplers and cylinders are in good condi-
tion before use. Damaged equipment is dan-
gerous.
FIG. 5-42: Most implements require double-acting hy-
draulics. Each implement cylinder will have two hoses
connected to it.
When single-acting service is required (cylinder with
only one hose), the inner “A” coupler will be used and
selector function, 1, must be turned to the left.
NOTE: For normal double-acting operation selector
function must be turned to the right.
Roll Over Protect in Structure (ROPS)
Tractor is equipped with fold-down ROPS which can be
folded down and the Tractor functionally used in that
condition for low clearance situation such as orchards,
vineyards, barns, and chicken houses, etc.
Always raise ROPS in to the fully erect position at the
earliest time.
ROPS must be maintained in this fully raised position at
all times unless practical operation of the tractor dictates
other wise, (as described above).
How to Tilt ROPS
FIG. 5-43: Remove linchpin, (1), remove pin, (2) , and
tilt the ROPS rearward care fully.
CAUTION: Do not weld, drill, bend or
straighten. Make sure all components are
in correct working order to provide the in-
tended protection.
Only original bolts, or equivalent replace-
ments, must be used and tightened to cor-
rect torque value Make sure both “hinge”
joints are properly secured.
1
1
FIG. 5-42
2
1
FIG. 5-43
To prevent PIN ASSY from being lost,
insert the ring of wire onto knob and assemble it.
FIG. 5-44