Iseki TM3215, Руководство по эксплуатации

Страница: 28 / 103

INSTRUMENTS & CONTROLS
27
CAUTION: DO NOT service hot engine. Al-
low to completely cool before servicing or
removing radiator cap
(11) Tachometer
Scale on gauge - Indicates engine speed on crankshaft
revolutions per minutes (rpm).
Index is also provided to show rear PTO speed of 540 at
approximately 2475 engine rpm.
Normally, the PTO speed should be between 540 and
600. Operating the PTO at a speed above 600 is too
fast, and may result in a breakdown of the tractor or
implement.
Hourmeter in centre of gauge indicates engine and trac-
tor use to assist in maintenance intervals. The extreme
right digit indicates 1/10 hour increments.
SWITCHES
FIG. 4-7: Location of switches
Horn / Light Turn Switch
FIG. 4-8: Horn / Light Turn Switch.
Horn Switch, 1 - Horn will sound when center switch
button is depressed.
Light Switch, 2 - Is a rotary switch with three operating
positions:
・
OFF - Fully counterclockwise. All lights off.
・
1st - Front clearance lamps and rear tail lights.
・
2nd - Main beam headlamps and rear tail lights.
NOTE: Passing switch
Passing switch is turned on when switch knob
is pulled to upward over the high beam posi-
tion.
NOTE: When high beam is selected (2nd position),
light in indicator light will come on.
Turn Switch, 3 - Operate switch handle in direction
Tractor is being turned. The appropriate flashing amber
warning light (ROPS-mounted) will operate as turn sig-
nal. Return switch to center position to cancel.
NOTE: Turn lights will not self-cancel. Select turn/haz-
ard light switch to center position after complet-
ing turn.
4
g
†
b
o
M l
P
11
FIG. 4-6
FIG. 4-7
2
1
3
Turn switch RH
1st
2nd
3
Turn switch LH
FIG. 4-8
high beam
passing
FIG. 4-F